Hot-Air stove / Hot-Air heating system 

To get a closer look please move your "Mouse" over the hot air stove - picture on the left.

Shell
Due to the large volume and the double-type locking, which is just as simple as efficient, the shell warrants a secure, time-saving and effortless charging.

Induced draught blower
The Induced draught blower guaranties uniform combustion, independent of the location and draught intensity of the existing chimney; in addition, it can be manually regulated by a reducing damper.

Hot air blower
The double-side intake, powerful radial blower with external motor and V-belt drive guaranties both a high hot-air capacity and a low-noise operation

Fill and fire room / Combustion Room
The two-part combustion room with a thick fireproof special fireclay lining and cast-iron fire and soot door is designed for an operating temperature of up to 1,200°C.

Heat exchanger with de-dusting
A large-sized heating element made of steel 2 mm thick is surrounded by cast plates, 2 to 15 mm thick, according to DIN 1691, and permits the rapid transmission of combustion energy into hot air. A highly efficient radial blower conveys the heated air through ducts even into distant rooms. The integrated flue gas de-dusting system safeguards the observance of emission limits stipulated by the law.

Particulate collection

Flue gas collector box

Hot air outlet of the high value EWI-Therm hot air stoves / hot air heatings type Prestige-SE and Optimal

Flue gas outlet

Return air filter blower

Cleaning eye / Cleaning aperture

Post combustion chamber / Reheating chamber

Flame bridge

Soot dump

Cleaning eye / Cleaning aperture

Soot door/drawer

Fir door

Hot-air thermostat

...technical data of ...

• Hot-Air Stove / Hot-Air heating system type Optimal E 0, heating performance 34 kW dedicated to rooms up to 850 m³
• Hot-Air Stove / Hot-Air heating system type Optimal E I, heating performance 45 kW dedicated to rooms up to 1.100 m³
• Hot-Air Stove / Hot-Air heating system type Optimal E II / II-S, heating performance 58 kW / 49 kW dedicated to rooms up to 1.450 m³
• Hot-Air Stove / Hot-Air heating system type Optimal E III, heating performance 87 kW dedicated to rooms up to 2.200 m³
• Hot-Air Stove / Hot-Air heating system type Optimal E IV, heating performance 116 kW dedicated to rooms up to 2.900 m³
• Hot-Air Stove / Hot-Air heating system type Optimal E V, heating performance 145 kW dedicated to rooms up to 3.800 m³
• Hot-Air Stove / Hot-Air heating system type Optimal E VI, heating performance 170 kW dedicated to rooms up to 4.800 m³
• Hot-Air Stove / Hot-Air heating system type Optimal E VII, heating performance 198 kW dedicated to rooms up to 5.600 m³

Technical data: Hot-Air stove / Hot-Air heating system type Optimal-E 0

Total length:	A / mm 2.055	Total width:	B / mm 830
Total height (without hot water module):	C / mm 2.050	Hot-Air outlet Ø:	D / mm 350
Smoke Pipe Ø:	E / mm 150	Length of draught blower:	F / mm 530
Filter box height:	G / mm 1.000	Height up to lower edge of smoke pipe socket:	H / mm 1.400
Height up to Hot-Air hood:	I / mm 1.950	Height of bottom part:	J / mm 750
Filter box depth:	K / mm 615	Shell projection:	L / mm 450
Height to bottom edge of shell:	M / mm 1.500	Filling depth:	N / mm 400
Length of bottom part:	O / mm 1.000	Hot-water heating module (optional):	P / mm 300
Type:		0
Rated heating capacity:		34 kW
For rooms as per DIN up to:		500 - 850 m³
Fuel consumption:		10 - 12 kg/h
Blower capacity, free-blowing:		2.200 m³/h
Weight:		900 kg
Hot-Air blower:		0,55 kW
Induced draught blower:		0,37 kW, 400 Volt, feed cable 5 x 2,5 mm2, secured with 16A
Chimney design		... as per DIN 4705
Shell capacity depending on stove / heating size:		up to 240 Ltr.
All contents and specifications are subject of change without notice.

top

Technical data: Hot-Air stove / Hot-Air heating system type Optimal-E I

Total length:	A / mm 2.055	Total width:	B / mm 830
Total height (without hot water module):	C / mm 2.050	Hot-Air outlet Ø:	D / mm 400
Smoke Pipe Ø:	E / mm 150	Length of draught blower:	F / mm 530
Filter box height:	G / mm 1.000	Height up to lower edge of smoke pipe socket:	H / mm 1.500
Height up to Hot-Air hood:	I / mm 1.950	Height of bottom part:	J / mm 750
Filter box depth:	K / mm 615	Shell projection:	L / mm 450
Height to bottom edge of shell:	M / mm 1.500	Filling depth:	N / mm 400
Length of bottom part:	O / mm 1.000	Hot-water heating module (optional):	P / mm 300
Type:		I
Rated heating capacity:		45 kW
For rooms as per DIN up to:		650 - 1.100 m³
Fuel consumption:		12 - 15 kg/h
Blower capacity, free-blowing:		3.250 m³/h
Weight:		940 kg
Hot-Air blower:		0,75 kW
Induced draught blower:		0,37 kW, 400 Volt, feed cable 5 x 2,5 mm2, secured with 16A
Chimney design		... as per DIN 4705
Shell capacity depending on stove / heating size:		up to 240 Ltr.
All contents and specifications are subject of change without notice.

top

Technical data: Hot-Air stove / Hot-Air heating system type Optimal-E II / II-S

Total length:	A / mm 2.255	Total width:	B / mm 930
Total height (without hot water module):	C / mm 2.090	Hot-Air outlet Ø:	D / mm 450
Smoke Pipe Ø:	E / mm 180	Length of draught blower:	F / mm 550
Filter box height:	G / mm 1.000	Height up to lower edge of smoke pipe socket:	H / mm 1.620
Height up to Hot-Air hood:	I / mm 1.990	Height of bottom part:	J / mm 750
Filter box depth:	K / mm 615	Shell projection:	L / mm 450
Height to bottom edge of shell:	M / mm 1.500	Filling depth:	N / mm 400
Length of bottom part:	O / mm 1.200	Hot-water heating module (optional):	P / mm 300
Type:		II (II-S constructed in the same way)
Rated heating capacity:		58 kW / II-S: 49 kW
For rooms as per DIN up to:		800 - 1.450 m³
Fuel consumption:		15 - 25 kg/h
Blower capacity, free-blowing:		4.000 m³/h
Weight:		1.200 kg
Hot-Air blower:		1,1 kW
Induced draught blower:		0,37 kW, 400 Volt, feed cable 5 x 2,5 mm2, secured with 16A
Chimney design		... as per DIN 4705
Shell capacity depending on stove / heating size:		up to 240 Ltr.
All contents and specifications are subject of change without notice.

top

Technical data: Hot-Air stove / Hot-Air heating system type Optimal-E III

Total length:	A / mm 2.255	Total width:	B / mm 930
Total height (without hot water module):	C / mm 2.200	Hot-Air outlet Ø:	D / mm 550
Smoke Pipe Ø:	E / mm 200	Length of draught blower:	F / mm 550
Filter box height:	G / mm 1.000	Height up to lower edge of smoke pipe socket:	H / mm 1.700
Height up to Hot-Air hood:	I / mm 2.100	Height of bottom part:	J / mm 750
Filter box depth:	K / mm 615	Shell projection:	L / mm 450
Height to bottom edge of shell:	M / mm 1.550	Filling depth:	N / mm 400
Length of bottom part:	O / mm 1.200	Hot-water heating module (optional):	P / mm 300
Type:		III
Rated heating capacity:		87 kW
For rooms as per DIN up to:		1.200 - 2.200 m³
Fuel consumption:		25 - 30 kg/h
Blower capacity, free-blowing:		6.000 m³/h
Weight:		1.250 kg
Hot-Air blower:		1,5 kW
Induced draught blower:		0,37 kW, 400 Volt, feed cable 5 x 2,5 mm2, secured with 16A
Chimney design		... as per DIN 4705
Shell capacity depending on stove / heating size:		up to 240 Ltr.
All contents and specifications are subject of change without notice.

top

Technical data: Hot-Air stove / Hot-Air heating system type Optimal-E IV

Total length:	A / mm 2.600	Total width:	B / mm 1.020
Total height (without hot water module):	C / mm 2.290	Hot-Air outlet Ø:	D / mm 600
Smoke Pipe Ø:	E / mm 220	Length of draught blower:	F / mm 620
Filter box height:	G / mm 1.200	Height up to lower edge of smoke pipe socket:	H / mm 1.740
Height up to Hot-Air hood:	I / mm 2.190	Height of bottom part:	J / mm 750
Filter box depth:	K / mm 760	Shell projection:	L / mm 500
Height to bottom edge of shell:	M / mm 1.700	Filling depth:	N / mm 400
Length of bottom part:	O / mm 1.400	Hot-water heating module (optional):	P / mm 300
Type:		IV
Rated heating capacity:		116 kW
For rooms as per DIN up to:		1.500 - 2.900 m³
Fuel consumption:		30 - 35 kg/h
Blower capacity, free-blowing:		7.500 m³/h
Weight:		1.600 kg
Hot-Air blower:		2,2 kW
Induced draught blower:		0,37 kW, 400 Volt, feed cable 5 x 2,5 mm2, secured with 16A
Chimney design		... as per DIN 4705
Shell capacity depending on stove / heating size:		up to 240 Ltr.
All contents and specifications are subject of change without notice.

top

Technical data: Hot-Air stove / Hot-Air heating system type Optimal-E V

Total length:	A / mm 2.600	Total width:	B / mm 1.020
Total height (without hot water module):	C / mm 2.450	Hot-Air outlet Ø:	D / mm 700
Smoke Pipe Ø:	E / mm 220	Length of draught blower:	F / mm 620
Filter box height:	G / mm 1.200	Height up to lower edge of smoke pipe socket:	H / mm 1.900
Height up to Hot-Air hood:	I / mm 2.350	Height of bottom part:	J / mm 750
Filter box depth:	K / mm 760	Shell projection:	L / mm 500
Height to bottom edge of shell:	M / mm 1.700	Filling depth:	N / mm 300
Length of bottom part:	O / mm 1.400	Hot-water heating module (optional):	P / mm 300
Type:		V
Rated heating capacity:		145 kW
For rooms as per DIN up to:		1.800 - 3.800 m³
Fuel consumption:		35 - 40 kg/h
Blower capacity, free-blowing:		9.400 m³/h
Weight:		1.700 kg
Hot-Air blower:		2,2 kW
Induced draught blower:		0,37 kW, 400 Volt, feed cable 5 x 2,5 mm2, secured with 16A
Chimney design		... as per DIN 4705
Shell capacity depending on stove / heating size:		up to 240 Ltr.
All contents and specifications are subject of change without notice.

top

Technical data: Hot-Air stove / Hot-Air heating system type Optimal-E VI

Total length:	A / mm 2.600	Total width:	B / mm 1.200
Total height (without hot water module):	C / mm 2.750	Hot-Air outlet Ø:	D / mm 700
Smoke Pipe Ø:	E / mm 250	Length of draught blower:	F / mm 620
Filter box height:	G / mm 1.200	Height up to lower edge of smoke pipe socket:	H / mm 2.250
Height up to Hot-Air hood:	I / mm 2.700	Height of bottom part:	J / mm 750
Filter box depth:	K / mm 760	Shell projection:	L / mm 500
Height to bottom edge of shell:	M / mm 1.700	Filling depth:	N / mm 400
Length of bottom part:	O / mm 1.400	Hot-water heating module (optional):	P / mm 300
Type:		VI
Rated heating capacity:		170 kW
For rooms as per DIN up to:		2.300 - 4.800 m³
Fuel consumption:		40 - 50 kg/h
Blower capacity, free-blowing:		14.000 m³/h
Weight:		1.800 kg
Hot-Air blower:		3,0 kW
Induced draught blower:		0,37 kW, 400 Volt, feed cable 5 x 2,5 mm2, secured with 16A
Chimney design		... as per DIN 4705
Shell capacity depending on stove / heating size:		up to 240 Ltr.
All contents and specifications are subject of change without notice.

top

Technical data: Hot-Air stove / Hot-Air heating system type Optimal-E VII

Total length:	A / mm 3.500	Total width:	B / mm 950
Total height (without hot water module):	C / mm 2.800	Hot-Air outlet:	D / mm 750 x 750
Smoke Pipe Ø:	E / mm 250	Length of draught blower:	F / mm
Filter box height:	G / mm	Height up to lower edge of smoke pipe socket:	H / mm
Height up to Hot-Air hood:	I / mm 2.700	Height of bottom part:	J / mm 1000
Filter box depth:	K / mm	Shell projection:	L / mm 400
Height to bottom edge of shell:	M / mm	Filling depth:	N / mm 400
Length of bottom part:	O / mm 3.100	Hot-water heating module (optional):	P / mm
Type:		VII
Rated heating capacity:		198 kW
For rooms as per DIN up to:		2.700 - 5.600 m³
Fuel consumption:		50 - 60 kg/h
Blower capacity, free-blowing:		20.000 m³/h
Weight:		3.000 kg
Hot-Air blower:		1,5 / 4,0 kW
Induced draught blower:		0,37 kW, 400 Volt, feed cable 5 x 2,5 mm2, secured with 16A
Chimney design		... as per DIN 4705
Shell capacity depending on stove / heating size:		up to 240 Ltr.
All contents and specifications are subject of change without notice.		... more: Warmluftöfen / Warmluftheizungen - german  (PDF appr. 2,6 MB)   New Hot-Air stoves / Hot-Air stoves- english (PDF appr. 400 kB) ... to the downloadarea

top

• Partner-Login
• Downloadarea

• EWI-Therm Products in a virtuell joinery

• Imprint
• Disclaimer
• Privacy Policy
• Sitemap