Slow combustion stove
... type GRA G/0 dedicated to heat rooms up to 250 m³
If workshops or rooms need to be heated quickly and evenly, the EWI THERM slow-combustion stove GRA-G will be your first choice.
The GRA-G is the largest and most powerful EWI-Therm slow-combustion stove.. Equipped with a double jacket, it is the only stove which has an additional fan on the back side. Room heating is based on the circulating air principle.
Controlled by a thermostat, the fan takes in the cold room air, leads it through the furnace jacket and releases it in heated condition at the floor. According to this method, the rooms are heated quickly, evenly and without dust turbulences.
| Slow combustion stove type GRA-G/0, technical data: | |||
Slow combustion stove type GRA-G/0 |
Heating performance (with circular heating element) |
13 kW (14,9 kW) |
|
| For rooms up to | 250 m³ (as per DIN 4108) | ||
| Height | 104 cm | ||
| Diameter | 66 cm | ||
| Rauchrohr Ø | 150 mm | ||
| Height up to lower flue pipe edge | 77 cm | ||
| Filling section volume | 100 ltr | ||
| Chimney Ø | 150 mm / 180 mm (as per DIN 13348-1) | ||
| Øof filling volume | 215 mm | ||
| Chimney height | ca. 6 m | ||
| Weight | 190 kg | ||
| Exhaust gas flow rate | 17 g/s | ||
| Minimum conveying pressure | 1,5 mbar | ||
| Exhaust gas temperature | 260 m³/h | ||
| Gebläseluftleistung | 240 °C | ||
| Stromanschluß | 220 V / 42 W (bauseits nach VDE) | ||
| Flue pipe outlet | left (Standard), optionally on the right | ||
| All contents and specifications are subject of change without notice. | *Connection to a stainless steel chimney only in connection with a circular heating element. | ||
|
... more:
|
|||
© Eisenwerk Winnweiler Ludwig Krämer KG